With the development trend of social economy, automatic screw machines are gradually used in every company, so what are the detailed available methods? In order to better let us have a stronger grasp of it, as a professional automatic screw machine manufacturer, I will give you a detailed introduction attentively. Generally speaking, the automatic screw machine is equipped with a rotary table and a manipulator, which can complete multi-process and simultaneous work. It can also lock all the screws on other products at the same time. From the effect point of view, the time for each lock is about 3 seconds. In actual use, workers usually only put the products into the fixtures on the equipment. , after locking, it is automatically removed by the manipulator and put into the conveyor belt. In some corresponding production lines, some special production lines can be used, and they are in the middle. The products must enter the production line conveyor belt before locking the screws and after screwing the screws. Place it next to the conveyor belt: Generally, the product should be placed in a convenient way. In many automatic screw machine manufacturers, it is usually possible to complete the synchronous operation of placing the product, screwing the screw, and taking the product by the manipulator, and the time for screwing the screw and taking the product by the manipulator is generally average. Within 2 seconds, this requires employees to place the product within 2 seconds. If the product is placed for too long, the efficiency of the machine and equipment cannot be fully utilized. If the product contains fragile parts, it is recommended to place the product. The assembly is carried out after the screwing process.