In the stamping industry, many stamping manufacturers choose to use automatic punch feeders for auxiliary metal coil stamping production. There are many types and models of punch feeders, such as NC servo feeders, yaw feeders, and three-in-one feeders. How to correctly use and maintain the punch feeder has become a difficult problem in the industry. The relevant information on the correct use and maintenance of the punch feeder is hoped to be helpful to everyone.

1. It is strictly required to follow the instruction manual of the punch feeder, and be flexible to deal with unexpected problems.

The application of the punch feeder must be used in strict accordance with the user manual, and flexible response to emergencies. The management personnel must combine the length of operation and the characteristics of each component of the mechanical equipment to determine different maintenance regulations, and formulate the daily maintenance of the punch feeder. Rules and regulations. So that the operation is based on evidence, and the maintenance has rules to follow.

2. Correctly ventilate and dissipate heat for the data cabinet

The punch feeder is equipped with a heat dissipation system, so check whether the cooling fans on the electrical cabinet work normally before starting the machine every day, and clean the dust on the filter net in time. The feeder has a unique thermal protection device, the control system will immediately generate an overheating alarm due to abnormally high temperature or the system will stop working to protect the numerical control system from damage. However, the method of opening the electrical cabinet to dissipate heat is extremely inadvisable. Not only will an electric shock accident occur, but also sundries will easily fall in, thereby accelerating the damage of electrical accessories under long-term exposure.

3. It is necessary to tidy up regularly, clean the environment where the machine is used, and ensure that the machine and electrical are free from pollution and sundries.

The use environment of the punch feeder is special, and oil mist, dust, and even metal powder and metal debris are often the culprits of potential safety hazards. Therefore, the workshop management should be seriously implemented on the punch feeder equipment. Form a good habit of regular rectification, checking when starting up, and cleaning when shutting down. What cannot be ignored is the hazard of metal debris. Once the metal debris falls on the line or electrical device, it is easy to cause the insulation resistance between components to drop, and even lead to damage to components and lines.